1. Warp tension control: The length of the warp yarn is inconsistent when it is opened to a certain maximum height and when it is flat. Since glass fiber has basically no expansion and contraction, it is necessary to use an appropriate warp tension control system such as a grinding disc tensioner to control the yarn tension.

2. Fabric complete edge structure: Use a shuttle loom structure; weft tension control is the key.

3. Fabric thickness and width: Considering the influence of thickness during the weft beating process, it is necessary to ensure that the opening is clear and the shuttle movement height needs to be reserved sufficiently.

During coarse adjustment, place the spindles on the two adjacent outer spindle brackets, guide the braiding line to the braiding point through the swing rod, and stack it tightly. When the braiding line enters or exits from the notch on the sliding turntable track, its distance to the edge of the upper spindle sliding frame must be basically equal.

The products of Cangzhou Jinbo Machinery Technology Co., Ltd. are mainly rubber machinery, and the main models are: high-speed wire winding machine, wire winding machine, wire winding machine series, industrial pipe forming machine, wire braiding machine, wire braiding machine series, wire stranding machine series, wire preforming series, water cloth winding and unwinding machine, braiding machine spindles, rubber machine and other series of products.